Free template
Job sheet template for UK trades
A job sheet records one job from start to finish: the client and site, what was quoted, who went and when, what was done and used, and the client’s sign-off. Below is one filled in on a real job, then every field explained, with what changes for gas, electrical and building work.
An example job sheet for a boiler replacement: the same job as our quotation template, done over two days.
Job sheet
J001 · quote Q001-1 accepted 3 October
Your Business Name Ltd
07700 900000 · Gas Safe reg. 123456
Client and site
Mr Alan Example
1 Station Road, Anytown AB1 3EF
07700 900111
Key safe by back door, code from Alan on the day.
Park on the drive. Dog in the kitchen.
The job
Replace the existing boiler with a 30kW combi, fit a magnetic filter, replace two radiators and fit thermostatic valves throughout.
Engineer
Dan (lead), with Sam on day 1 for the strip-out
Time on site
| Day | Arrived | Left | Break | Hours |
|---|---|---|---|---|
| Tue 21 October | 08:00 | 16:30 | 30 min | 8 |
| Wed 22 October | 08:00 | 16:30 | 30 min | 8 |
| Total (lead engineer) | 16 | |||
Materials used
| Item | Qty | Note |
|---|---|---|
| Combi boiler 30kW | 1 | As quoted |
| Type 22 double panel radiator 600x1000 | 2 | As quoted |
| Thermostatic radiator valves (pair) | 7 | As quoted |
| Magnetic system filter | 1 | As quoted |
| 22mm copper pipe | 3m | Van stock, not on quote: covered by labour line |
Work carried out
Old boiler removed and system power-flushed. New combi fitted in the same position, flue through the same hole. Filter fitted on the return. Two bedroom radiators replaced, TRVs fitted to all 7. System filled, bled and balanced.
Checks and certificates
Gas tightness test passed. Flue gas analysis within range. Benchmark checklist completed and left with the client. Building Regulations notification submitted.
Follow-up
Register the boiler warranty. Book the first annual service for next October.
Client sign-off
Work complete and system working.
Signed: ______________________ Date: 22 October
What a job sheet should include
- Job number
- One number per job, the same one on the quote and the invoice. Then a phone call, a photo or a question from the office all point at one job.
- Client and site address
- Who the job is for, and where the work is, if that’s a different address. A landlord pays from one address and the work happens at another.
- Contact on site and access notes
- Who lets you in, their number, the key safe code, parking, pets, and which rooms are off limits. This is the part people forget, and it costs the first half hour.
- What the job is
- Copied from the accepted quote, so the person on site does what was priced, not what they remember from the phone call.
- Who is going and when
- The engineer or crew, the date or dates, and arrival and leave times each day. Hours on site are what you check the labour line against.
- Work carried out
- What was actually done, in plain words. Anything different from the quote goes here with the reason, before it turns into an argument at invoice time.
- Materials used
- What came off the van or from the merchant, with quantities. It tells you whether the quote was right and what to restock.
- Checks, tests and certificates
- The readings and certificate numbers your trade needs: commissioning checks on a boiler, test results on a circuit.
- Follow-up
- Anything left open: a part on order, a return visit, a fault found that needs its own quote.
- Sign-off
- The client’s name, signature and date, to agree the work was done. On a paper sheet this is the line that ends disputes.
Job sheet templates by trade
The layout above works for every trade. What changes is the checks box and a few lines.
- Plumbing and gas job sheet
- Gas Safe number, appliance make, model and serial number, flue gas readings, and whether the Benchmark checklist was completed. Note any “at risk” or “immediately dangerous” finding and what the client was told.
- Electrical job sheet
- Circuits worked on, test results, and which certificate was issued: an installation certificate or a minor works certificate. Note anything found outside the job that needs a separate quote.
- Builder’s job sheet
- The stage of the job (“first fix complete”), subcontractors on site that day, deliveries taken, and any variation the client asked for, with the date it was agreed.
- Maintenance and call-out job sheet
- The fault as reported and as found, time on site, parts fitted, and whether it’s fixed or needs a return visit. Keep it to one page and get it signed before you leave.
Why the job sheet pays for itself
- It makes the invoice. Hours on site and materials used are the numbers you bill. With the sheet in hand the invoice goes out the day the job finishes, not at the weekend from memory.
- It checks the quote. Quoted 16 hours, took 16: the price was right. Took 22: next time it costs more. Without the sheet you never find out.
- It settles arguments. A signed sheet that lists the work done and any changes agreed on the day ends most “that wasn’t what I asked for” calls.
- It saves the first half hour. Access notes and a site contact mean nobody stands on the doorstep phoning the office.
The job sheet, kept on the job
In TradePlan the top half of the job sheet is the job itself. Each job has its number, the client and site address, notes for access and anything else the crew needs, who is going, and the dates. When a quote is accepted the job carries it, and the invoice is made from the same job, so the numbers match all the way through.
On their phone, each person sees the jobs they’re booked on, can call the client or open the address in Maps, add notes, and move the job from scheduled to in progress to complete. Every status change is recorded with who made it and when. See how scheduling works or all the features.
Try it free for 14 daysFAQ
Job sheet questions
What is a job sheet?
A one-page record of a single job: who it’s for, where it is, what was quoted, who did it and when, what was done, what was used, and the client’s sign-off. It goes to site with the engineer and comes back to the office for invoicing.
What is the difference between a job sheet and a job card?
Nothing that matters. “Job card”, “job sheet” and “work order” are used for the same thing. Some firms use “work order” for the instruction sent out and “job sheet” for the record that comes back.
Who fills in the job sheet?
The office fills in the top half (client, address, what was quoted, who is going). The engineer fills in the bottom half on site (times, work done, materials, checks) and gets it signed.
How long should I keep job sheets?
Keep them with the job’s quote and invoice for as long as you keep your business records. HMRC asks sole traders to keep records for at least 5 years after the 31 January Self Assessment deadline, and limited companies for 6 years from the end of the financial year.
Is there a job sheet app?
TradePlan isn’t a form app, but it holds the job sheet details on the job itself: client, site address, notes, the crew and the dates, with the quote and invoice attached. Your team sees their jobs on their phone. Try it free for 14 days.