Guide

Quote vs estimate vs invoice

An estimate is your best guess at the price before you’ve seen the job. A quote is a fixed price for defined work that binds you once the client accepts it, and an invoice asks for payment once the work is done. Below: the three side by side, one real job written up as all three, and where the law draws the line.

Comparison Factor Estimate Quotation (Quote) Invoice
When you send it Before you’ve seen the job, or when the scope can’t be known yet After a site visit, once you know what the job involves After the work, or after a stage of it
What it says “It will probably cost about this” “I will do this work for this price” “You owe me this amount by this date”
Fixed price? No. A guide, often a range Yes, for the scope it describes Yes. It’s the amount due
Binding? Not as a fixed price, but it must be honest and reasonable Yes, once the client accepts it It’s a demand for payment under the agreement
Can price increase? Yes, if unexpected complications arise, provided costs are reasonable No, unless a revised quote or variation is agreed in writing No. Must reflect the accepted quote plus agreed variations
Valid for Rarely stated A set date, often 30 days Until paid; it carries a due date
What comes next A site visit, then a quote The client accepts, you book the job The client pays, you close the job

One job, three documents

A homeowner rings about replacing an old boiler. Here is what they get from you at each stage. The quote is laid out in full on our quotation template, and the invoice on the trade invoice template.

The estimate, on the phone
A combi swap like yours usually comes to about £3,500 to £4,200 including VAT. It depends on the state of the pipework and whether the radiators need valves. I’ll give you a fixed price once I’ve seen it.
The quote, after the site visit
Q001-1: supply and fit a 30kW combi, two new radiators, seven pairs of thermostatic valves, a magnetic filter, 16 hours’ labour and waste removal. £3,808.80 including VAT. 25% deposit to book. Valid for 30 days. Excludes making good and decoration.
The invoice, when it’s done
INV001-1, for quote Q001-1: the same lines, £3,808.80 including VAT, less the £952.20 deposit received. Balance due £2,856.60 by 7 November, by bank transfer.

Notice what changes. The estimate is a range with a reason attached. The quote names every item, a validity date and what’s excluded. The invoice repeats the quote’s lines, so the client sees the price they agreed to, and subtracts what they’ve already paid.

The difference between a quote and an estimate

The whole difference is certainty. With a quote, you carry the risk: if the job takes longer than you thought, that’s your cost. With an estimate, the client carries some of it, because the price can move as you find out more.

That’s why clients prefer quotes, and why a quote usually wins against an estimate at the same price. Two fixed prices are easy to compare; a fixed price and a range are not.

Give an estimate when

  • The client wants a ballpark on the phone before booking a site visit.
  • You can’t see the problem until you open it up: a leak under a floor, a fault in a wall, a roof you can’t get on to.
  • The job is charged by time, such as fault-finding or a day rate, and you can only say roughly how long.

Give a quote when

  • You’ve seen the job and can list what it needs.
  • The client is comparing you with other trades.
  • You want a deposit. Clients pay a deposit against a fixed price far more readily than against a guess.

Call it what it is. A document headed “Estimate” that reads like a fixed price, or a “Quote” full of “approximately”, causes the arguments both are meant to prevent. If part of a job is uncertain, quote the part you can see and give a separate estimate, or a provisional sum, for the part you can’t: “Replace boiler: £3,808.80. If the flue needs rerouting: estimated £250 to £400, confirmed before we start.”

Is a quote legally binding in the UK?

Once the client accepts it, yes: an accepted quote generally forms the contract. You agree to do the work it describes; they agree to pay the price it states. Before acceptance it’s an offer, which you can revise or withdraw, and the validity date says how long it stands.

That’s why the scope matters more than the total. If the client later asks for an extra socket or a different tile, that’s outside the quote. Agree the extra price in writing before you do the work, ideally as a revised quote; our guide on how to write a quote for a job covers how to set out line items and exclusions to protect your margin. “While you’re here” jobs done on a handshake are where most payment disputes start.

Can a tradesperson charge more than an estimate?

An estimate isn’t binding as a fixed price, so the final invoice can differ if unforeseen complications emerge. But it isn’t meaningless either. For work done for consumers, the Consumer Rights Act 2015, section 50, makes what you tell the client before they agree binding if they rely on it, and section 51 says that where no price was fixed, they pay a reasonable one.

In practice, trading standards guidance and courts expect final invoices to stay within roughly 10% to 15% of an estimate unless unexpected issues were documented and agreed beforehand. An estimate of £1,200 followed by a surprise bill for £1,900 is hard to defend. The fix is simple: when you find the job will cost more, stop and tell the client before you carry on.

The difference between a quote and an invoice

A quote comes before the work and asks “will you go ahead?”. An invoice comes after it and asks “please pay”. The invoice needs things a quote doesn’t: a unique invoice number, the date of the work, a due date and your bank details.

The lines should match. Build the invoice from the accepted quote, add any variations the client agreed as their own dated lines, and subtract the deposit and any stage payments. A client who can see their quote in the invoice has nothing to query, and pays sooner.

Where a pro forma invoice fits

A pro forma invoice asks for money before the work is done, most often a deposit. It isn’t a VAT invoice, so the client can’t reclaim VAT on it. If you’re VAT registered, mark it “This is not a VAT invoice” and issue a proper invoice once you’ve been paid or the work is done.

From estimate to paid, in order

  1. Estimate on the first call, as a range, and say what it depends on.
  2. Quote within 48 hours of the site visit, itemised, with a validity date and exclusions. Speed wins work; our guide to following up quotes covers what to do if it goes quiet.
  3. Take the deposit once the quote is accepted, and book the date.
  4. Revise the quote for any change before you do the extra work.
  5. Invoice the day the job finishes, from the quote, with a due date as a real date; our guide to invoice payment terms and cashflow has wording for 7-day, 14-day and net 30 terms.

The full version, from first enquiry to aftercare, is in from quote to completion.

Quote once, invoice from it

In TradePlan you build the quote from your own price list and send it as a branded PDF with a validity date. Quotes about to expire are flagged so you can chase them, and every revision is kept, so you can always show the client what they agreed to. Mark the quote accepted and the job moves to won, ready to book on the calendar.

When the job’s done, the invoice copies the lines and VAT rate from the job’s latest quote. Record the deposit and stage payments as they come in and the balance updates. See how quoting works.

Try it free for 14 days

FAQ

Quote, estimate and invoice questions

What is the difference between a quote and an estimate?

A quote is a fixed price for a defined piece of work: once the client accepts it, that is the price. An estimate is your best guess at what the work will cost, often given as a range before you have seen the job. Send an estimate when the scope is unknown and a quote once you know what the job involves.

Is a quote legally binding in the UK?

Once the client accepts it, a quote generally forms the contract: you do the work it describes for the price it states. If the work changes, agree the new price in writing before you do the extra work. Until it is accepted, you can withdraw or revise it.

Can a tradesperson charge more than a quote?

No. An accepted quote is a fixed price for the agreed work. If unexpected complications arise or the client requests extras, agree the additional price in writing before doing the work. Any extra costs billed without client consent cannot be enforced.

Can a tradesperson charge more than the estimate?

An estimate is not a fixed price, so the final bill can differ. But the Consumer Rights Act 2015 says what you tell a consumer before they agree can be binding if they rely on it, and where no price was fixed the charge must be reasonable. Tell the client as soon as you know the cost is going up, and get their agreement before carrying on.

How much can a final bill exceed an estimate in the UK?

There is no set percentage limit in UK law, but the Consumer Rights Act 2015 requires charges to be reasonable. In practice, trading standards guidance and courts expect final invoices to stay within roughly 10% to 15% of an estimate unless the tradesperson warned the client beforehand and agreed the extra cost.

What is the difference between a quotation and an invoice?

A quotation is the price you offer before the work. An invoice asks for payment after the work, or after a stage of it. The lines on the invoice should match the accepted quote, plus any changes the client agreed to along the way.

Is a quotation the same as a quote?

Yes. Quotation is the formal word and quote the everyday one. Both mean a fixed price for a defined job.

Is a pro forma invoice a real invoice?

No. A pro forma invoice asks for payment before the work, such as a deposit, but it is not a VAT invoice. Mark it “This is not a VAT invoice” and issue the proper invoice once you are paid or the work is done.

Should I give an estimate or a quote?

Give a quote whenever you can see the job. Clients compare fixed prices more easily and accept them faster. Keep estimates for the phone call before a site visit, and for work where you genuinely can’t see the problem until you open it up.

Get your evenings back

Set up your price list, send your first quote, and see the difference by the end of the week.

Start your 14-day free trial

No credit card required. No setup fees. Cancel anytime.